Part Number: TUSB3210 Team,
How to configure TUSB3210 as a USB to GPIO device??
Most of time, we confige TUSB3210 as USB to I2C, this way need external EEPROM.
Now, we want to us TUSB3210 as USB to GPIO, how we can do this?
Does default setting…
Hi Cheol-Hyeon Cho,
I do not have clear your question, so I can explain to you how it works according to the data sheet and firmware programming flow 8052 documents :
www.ti.com/.../tusb3210.pdf
www.ti.com/.../sllu020a.pdf
As it mentions on programming…
Hello,
If that is the case you also can verify the suspend pin status (pin 16), or USBSTA: USB Status Register bit [6], the SUSR register will show the suspend status, please note this mus be done in the firmware.
Regards, Roberto
Dear Mr. Roberto,
Thanks for your concerns.
Compiling the Firmware with KEIL, it must be used with LX51 linker.
For HID communication, the Report descriptor must be re-designed for me.
And using HIDAPI, I could have communicated it on Windows…
Part Number: TUSB3210 Other Parts Discussed in Thread: TUSB3410 Hello, I have a "usbclient.bin" file that is being downloaded to the TUSB3210 from a Linux host when the device is connected.
Please help me find a solution for how to do the same when…
Hmm,
It has been confirmed that the boot code works because the EEPROM information is erased.
In Windows 7, the new firmware works through the firmware loader driver,
In Windows 10, this is what happens because there is no loader.
To solve this…
Part Number: TUSB3210 Dear expert,
I am looking for USB to SMBUS bridge solution. And find TUSB3210 should be OK.
Because I am not a interface bridge background.
Did we have EVM or reference design for this application?
-Ben
Part Number: TUSB3210 Hi Sirs,
We have follow SM-USB-DIG Platform reference to design. (SBOU098)
We saw TI Web release TUSB3x10 EEPROM Burner (Rev. B)
Is this EEPROM is for SBOU098?
If not, have others EEPROM version can share?
