Part Number: AM4378
Tool/software: Linux
Dear Experts,
I have 4 questions listed below I'm hoping somebody can help me with.
I'm using an AM437x GP EVM running ti-processor-sdk-linux-am437x-evm-03.02.00.05 pre-built image booting from SD card…
Lisandro,
Thanks for the background and let me try to address your specific questions:
user4667683 said: - Is Uniflash 3.4.1 the more appropriate tool to flash Sitara AM335x based boards via USB (or Ethernet)? Or is there any other better tool?
…
Hi,
I'm facing a problem. I used am335x-evm and I used ti-processor-sdk-linux-am335x-evm-02.00.02.11. I mounted a 256MByte NAND flash (MT29F2G08AB) I can boot up the SPL, u-boot then kernel successfully from NAND device.
But when I changed the NAND…
Part Number: TDA4AL-Q1
Tool/software:
Hi, Dear Expert
Customer suffer from SD Boot issues, I think root cause should be SD try to swap UHS mode, but customer's SCH do not reserve circuit for 1.8v UHS.
Error logs, Customer's board
[ 1.277786…
Part Number: TMS320C6678 Hi,
Connected and configured the board as documented in the Quick Start Guide. The board operates and runs the embedded app as stated in the guide. I have installed the latest version of CCS ( Version: 11.0.0.00012 ) and the…
Hi, all!
I have custom board, based on DM816x EVM. On board have 512MB DDR3 connected to the EMIF1 at address 0xC0000000. At this moment I work only with ARM processor and Linux. But I need write some DSP program and have some questions about SDK components…
Hello Chen,
Are you willing to help me elaborate a "basic guide", right here on this thread?
I figure I could post my step by step doubts, and in the end we can compile a guide to remain here, on as a chapter of a separate wiki... I will write a few…
Hi Angelo! Welcome to the forum! There are a few pieces to this puzzle that will make this a challenge. Before getting into the LabVIEW side of things, there is the actual firmware associated with the ADS1278 that you would need to address. The ADS1278…
Part Number: AM5716 Other Parts Discussed in Thread: AM5728 Hello Champs, SW: ti-processor-sdk-linux-rt-am57xx-evm-06.03.00.106-Linux-x86-Install.bin Customer connected AM5716 GPMC to FPGA. From the kernel log, it seems that the GPMC is initialized correctly…
