Hi Guys,
I have one WL1837MODCOM8I WLAN MIMO and BT Module EVB .I need to interface it with my Jacinto 6 (one of the Vayu Processro provided by TI) for Wi-Fi ( for wi-fi Direct,P2P, Hotspot). Well i am very new to this and not aware of anykind of information…
Other Parts Discussed in Thread: WL1837 , WL18XXCOM82SDMMC , WL1837MODCOM8I , WL1271 Hi,
I'm new to TI wi-fi driver framework.
I'm evaluating wireless functionality through the SDIO interface with WL1837 chip set (WL18xxCOM82SDMMC with WL1837MODCOM8I…
Hi Mete,
Please refer to our reference design which uses the W3006. This can be found at:
www.ti.com/.../tidc-wl1837modcom8i
Here you will find the full design for your reference (schematic and design files)
Also you can refer to the Vendor…
Other Parts Discussed in Thread: WL1837 , WL18XXCOM82SDMMC Hi,
I would like to evaluate wl1837 with lcdk138.
Which would be the easiest to connect from page:
http://www.ti.com/tool/WL18XXCOM82SDMMC?keyMatch=WL18xxCOM82SDMMC&tisearch=Search-EN-Everything#buy…
Part Number: WL1837MOD Other Parts Discussed in Thread: WL18XXCOM82SDMMC , , WL1837 Tool/software: Linux Hi.
We are having some issues to work with the WL1837MOD with the CM3 (Kernel 4.14.94-v7+, We compiled the module drivers for wlcore, wL18xx,…
Hi,
The GPIO1 and GPIO2 correspond to WLAN RS232 interface used for testing/debug with RTTT tool.
Similarly, the WL_UART_DBG pin is also a debug pin used to capture WLAN logs with the gLogger tool.
So these 3 pins will not be connected to the processor…
Hi Joseph,
here is what the customer found: The WL1837MODI COM8 board
http://www.ti.com/tool/tidc-wl1837modcom8i
has a PU resistor on WLAN_IRQ populated. This seems to put it into a test mode instead of functional mode. If the R20 is removed the…
Part Number: WL1837MOD Hi team,
My customer is using the WL1837MOD and is currently having their system go through certification lab needs is the actual test reports relative to ETSI/CE certification, so they can determine the worst cases for their…
