Linux/TDA2E: cant load from SD card bootloader

kalaiventhan v

Part Number: TDA2E

Tool/software: Linux

we brought the new board TDA2xx, we are trying to power up through sd card we following user manual (VisionSDK_UserGuide_TDA2xx),but its not bootable,so please give the instruction(steps) to get the correct output (bootable). error code:0x3808c

over 8 years ago

0 Yordan Kamenov over 8 years ago

TI__Mastermind 42515 points

Hi,

I have forwarded your question to the Vision SDK expert.

Regards,
Yordan

0 Piyali Goswami over 8 years ago in reply to Yordan Kamenov

TI__Mastermind 30245 points

Hello Kalaiventhan,
Have taken care of the following aspects?

1. SD Card has a FAT32 partition and has been marked bootable.

2. MLO has been placed in the FAT32 partition.

3. Boot switches on the board has been programmed to SD Card based boot mode

Thanks and Regards,

Piyali

0 Piyali Goswami over 8 years ago in reply to Piyali Goswami

TI__Mastermind 30245 points

Just a side note (applicable when you are able to get the SD boot working)

From the snap shot looks like you are running the OnTargetConnect GEL script from CCS. When you are able to get to the state of successfully booting with the SD Card you can remove the GEL scripts when attaching Cortex A15 to disallow conflict of the GEL programming versus SBL programming.

Processors

Processors forum

Linux/TDA2E: cant load from SD card bootloader