Linux/TDA2E: CCS bootable

kalaiventhan v

Part Number: TDA2E

Tool/software: Linux

I have complete the some steps after I need to load some files vision_sdk_c66xdsp_1_release.xe66, vision_sdk_ipu1_0_release.xem4 , vision_sdk_ipu1_1_release.xem4, vision_sdk_a15_0_debug.xa15fg . where I get this files.

over 8 years ago

0 Rishabh Garg over 8 years ago

TI__Guru 55685 points

Hi Kalaiventhan,

These are the Vision SDK binaries. I see that you have posted a few similar questions.
We can have a webex call in order to quickly resolve your issues.

Regards,
Rishabh

0 Alex Bashkov over 8 years ago

TI__Genius 13710 points

kalaiventhan v ,

You will have to build these files. Please follow "3.2 Building the application" (page 16 and on) in the VisionSDK_UserGuide_TDA2Ex.pdf.

Thanks,
Alex

0 kalaiventhan v over 8 years ago in reply to Alex Bashkov

Expert 2350 points

ok..thanks ..I have an another problem, I was reset c66x dsp.so I cant connect the target .it ask remove the reset function..what I do?

0 Alex Bashkov over 8 years ago in reply to kalaiventhan v

TI__Genius 13710 points

If you have installed the latest CCS auto device support you should have the script menu up top with various commands. As suggested in this thread: e2e.ti.com/.../574221 try to take the DSP out of reset. There are also other functions (besides the enableAllCores) you can play around with if this doesn't help you on your use case. Of course, run these functions prior to connecting to target.

Thanks,
Alex

0 kalaiventhan v over 8 years ago in reply to Alex Bashkov

Expert 2350 points

I am using TDA2xx.i have some error while I am generating binaries file .also I attached error screen shot also.

0 Rishabh Garg over 8 years ago in reply to kalaiventhan v

TI__Guru 55685 points

Hi Kalaiventhan,

I have answered these questions in other thread: e2e.ti.com/.../2111450

Regards,
Rishabh

0 kalaiventhan v over 8 years ago in reply to Rishabh Garg

Expert 2350 points

you:
Can you please set the correct value for CODEGEN_PATH_A15 in tools_path.mk

my question:
tell which value I will set CODEGEN_PATH_A15 in tools_path.mk

0 Mariya Petkova over 8 years ago in reply to kalaiventhan v

TI__Expert 4885 points

Hi, KELAIVENTHAN,

Please, write consecutively in the treads!!!

This: you:
Can you please set the correct value for CODEGEN_PATH_A15 in tools_path.mk

is taken from the other thread

you are writing in. It is not convenient to jump over threads.

Regards,

Mariya

0 kalaiventhan v over 8 years ago in reply to Mariya Petkova

Expert 2350 points

#invoking configure is failed , where I set xdc _configuro

0 Rishabh Garg over 8 years ago in reply to kalaiventhan v

TI__Guru 55685 points

Hi Kalaiventhan,

Please post only in one thread. Thanks.

Regards,
Rishabh

Processors

Processors forum

Linux/TDA2E: CCS bootable