AM335x eeprom

tejas patil

Hi,

We are developing new Am335x board for our project. Am335x eeprom how to erase and write for magic number & mac address ? OR Can i remove eeprom code from board.c in u-boot (read eeprom)?

Thanks
Tejas

over 10 years ago

0 Yordan Kovachev over 10 years ago

TI__Guru**** 161600 points

Hi Tejas,

You can do both: reprogram the magic number & disable the reading of eeprom from u-boot source code. You can also hard code the magic number of your board in u-boot.
Check the following links:
processors.wiki.ti.com/.../AM335x_Starter_Kit_ID_Memory_Programming
e2e.ti.com/.../297638
e2e.ti.com/.../1108183

Hope this helps.

Best Regards,
Yordan

Processors

Processors forum

AM335x eeprom