QT creator configuration with Sitara's PSDK

kalex

Hello, I am using QT5.5 and trying to find a guide to set up QT Creator's (v3.5.1) "Build&Run" environment to work with "ti-processor-sdk-linux-am57xx-evm-02.00.00.00" psdk. Does such a document or example exist please?

Thank you.

over 10 years ago

0 Biser Gatchev-XID over 10 years ago

TI__Guru**** 393215 points

Hi,

I will ask the software team to comment.

0 Kemal R. Shakir over 10 years ago in reply to Biser Gatchev-XID

TI__Guru 55345 points

Hello kalex,

Have you checked these labs processors.wiki.ti.com/.../Sitara_Linux_Training:_Hands_on_with_QT? Aren't they helpful?

Best regards,
Kemal

0 kalex over 10 years ago in reply to Kemal R. Shakir

Prodigy 170 points

Hello Kemal

Thank you for the link.
Yes that was the first thing I tried but unfortunately it was not successful. I thought maybe the reason is the guide referred to a different Sitara series (Am335x) and older QT creator version.
I can build fine by using the manual method (e.g. qmake->make).

The problem I see with QT Creator is at step 4 of "LAB 2: QT Creator Hello World":
At window "Build & Run"
Tab "QT Versions"
I select the "QT 5.5 Sitara..."
Instead of seeing the message
"No compiler can produce code for this QT version. Please define one or more compilers"
I see
"Qt version is not properly installed, please run make install".

Nevertheless I continued to set the compiler and debugger as described in the next LAB 2 sections but it did not make any difference.

I have tried to reinstall QT (as executable on Ubuntu 14.04) but I get to the same error.

Best Regards

0 Kemal R. Shakir over 10 years ago in reply to kalex

TI__Guru 55345 points

You have to run the Qt creator from the terminal. Not by the icon in dash. Please rerun step 2.

0 kalex over 10 years ago in reply to Kemal R. Shakir

Prodigy 170 points

Thank you for your help, I missed that step! QT Creator works fine now.

Processors

Processors forum

QT creator configuration with Sitara's PSDK