Linux SDK 02.00.01.07 QtCreator QML

STFZ

Hello,

I have installed the latest TI SDK 02.00.01.07 and setup QtCreator for Cross-Compilation. All works except I could not compile my application with QML. For example, QtQuick.Layouts and QtQuick.Controls cannot be found.

I followed all the steps mentioned in your wiki: processors.wiki.ti.com/.../Sitara_Linux_Training:_Hands_on_with_QT

How can I proceed?

Regards

Stefan

over 9 years ago

0 Biser Gatchev-XID over 9 years ago

TI__Guru**** 393215 points

I will forward this to the software team.

0 Kemal R. Shakir over 9 years ago in reply to Biser Gatchev-XID

TI__Guru 55345 points

Hello Stefan,

QtQuick.Layouts and QtQuick.Controls are parts of the qtquickcontrols, to include them in your project you should build the qtquickcontrols package.

echo 'PACKAGECONFIG_append = " accessibility"' >> conf/local.conf
MACHINE=am335x-evm bitbake qtquickcontrols

You can find the Processor SDK build steps described here.
If you see any obstacles, please refer to this thread.

Best regards,
Kemal

0 user731153 over 9 years ago in reply to Kemal R. Shakir

Prodigy 150 points

HI, SDK 02.00.01.07 is not find "conf/local.conf" : no such file or directory

0 Kemal R. Shakir over 9 years ago in reply to user731153

TI__Guru 55345 points

The conf/local.conf is not in the SDK 02.00.01.07. It is within the Arago build system.

0 STFZ over 9 years ago in reply to user731153

Intellectual 600 points

Hi user731153,

The best way is to build Qt Everywhere (download.qt.io/.../). So, you are independent from TI SDK and Arago.

0 user731153 over 9 years ago in reply to Kemal R. Shakir

Prodigy 150 points

thanks very much!

0 user731153 over 9 years ago in reply to Kemal R. Shakir

Prodigy 150 points

HI , I have been download am335x-evm-sdk-arago-src-02.00.01.07.tar.gz, but, after tar -xvf, all files are xxx.done, how can i do next step?

0 user731153 over 9 years ago in reply to STFZ

Prodigy 150 points

I want to bulid QT+OPENGLES 2.0 and I can not open this download.qt.io/.../ it display 404 not found.

0 Kemal R. Shakir over 9 years ago in reply to user731153

TI__Guru 55345 points

Now I fixed the link. The easiest way to build Arago is as per the steps in Processor SDK Building The SDK wiki page.

0 user731153 over 9 years ago in reply to Kemal R. Shakir

Prodigy 150 points

OK,Thank you.

0 user731153 over 9 years ago in reply to Kemal R. Shakir

Prodigy 150 points

Hello

I compiled the source code,but, There are some errors .

I did the following steps

1 : git clone git://arago-project.org/git/projects/oe-layersetup.git tisdk

2: ./oe-layertool-setup.sh -f configs/processor-sdk/processor-sdk-02.00.01.07-config.txt ///TI ProSDK

3: cd build

4:. conf/setenv

5:export PATH=/opt/ti-processor-sdk-linux-am335x-evm-02.00.01.07/linux-devkit/sysroots/x86_64-arago-linux/usr/bin:$PATH

6:echo 'PACKAGECONFIG_append = " accessibility"' >> conf/local.conf

7:MACHINE=am335x-evm bitbake qtquickcontrols

0 Kemal R. Shakir over 9 years ago in reply to user731153

TI__Guru 55345 points

Please open the conf/local.conf file and check the last appended lines for syntax errors.

0 user731153 over 8 years ago in reply to Kemal R. Shakir

Prodigy 150 points

HI, I miss some errors when i follow this. this is the log file.log.do_configure.zip

Processors

Processors forum

Linux SDK 02.00.01.07 QtCreator QML