AM5718: EVM with CSI2 interface

Chris Yorkey

Part Number: AM5718
Other Parts Discussed in Thread: TDA2E, IWR1443, AWR1243

Sitara Family and Friends,

The AM571x Industrial Development Kit unfortunately does not have the CSI2 interface on the layout of the board, that is a problem for those wanting to perform evaluation, especially in terms of using the CSI2 port (for camera interface, etc). Do we happen to have other development kits for AM5718 with the CSI2 interface available on the layout? (TI/3P/partner/etc)?

Thank you,

over 8 years ago

0 Biser Gatchev-XID over 8 years ago

TI__Guru**** 393215 points

The factory team have been notified. They will respond here.

0 Rogerio Almeida over 8 years ago in reply to Biser Gatchev-XID

TI__Mastermind 26205 points

Chris,
You are correct...I am not aware of 3P with CSI interface ready. There is an automotive board: J6ECO/TDA2E EVM CPU BOARD.

0 Daisuke Maeda over 8 years ago in reply to Rogerio Almeida

Guru 20205 points

Hi rogerio-san,

Are there any plans to release an evaluation module with CSI interface other than the automotive boards?

I would like connect the mmWave sensors (AWR1243 and IWR1443) with CSI interface to an evaluation module of processor (AM571x or others).

Best regards,

Daisuke

0 Rogerio Almeida over 8 years ago in reply to Daisuke Maeda

TI__Mastermind 26205 points

Daisuke,
Thanks for your interest in using our products and I am glad you mentioned the parts you want to interface with our AM57x product. In fact, we are working on a TI design with mmWave team. For more details, please contact your local TI rep.

0 Daisuke Maeda over 8 years ago in reply to Rogerio Almeida

Guru 20205 points

Hi rogerio-san,

Thank you for your reply.

I am going to contact my local TI rep.

Best regards,

Daisuke

Processors

Processors forum

AM5718: EVM with CSI2 interface