Dear ti
help to check the circuit as below
only one speaker is used ,if could connect as below .
thanks a lot
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Dear ti
help to check the circuit as below
only one speaker is used ,if could connect as below .
thanks a lot
Hi Jianfeng,
The schematic looks OK. I'm just curiouos on the implementation.
Is there a reason customer selected a stereo amplifier, but using only one channel summing both right and left signals? Is it because they want to drive only 1 speaker? Why not using mono amplifier?
Best regards,
-Ivan Salazar
Applications Engineer - Low Power Audio & Actuators
dear ivan
thanks a lot . i will try to change mono ,TPA2011?
If is it a right choose?
john
Hi John,
I think this is a good option.
Let us know if you have any further questions related to TPA2008D2. If you have questions on other device please start a new thread.
Best regards,
-Ivan Salazar
Applications Engineer - Low Power Audio & Actuators