TAS5828M: Process Flow

Kazuto Tatsumi

Part Number: TAS5828M
Other Parts Discussed in Thread: TAS5825M, , TAS5825P

Hi team,

I'm looking for the document explains TAS5828M process flow, and I found the link to TAS5825M process flow in the datasheet "8.3.7 Digital Audio Processing". Does it mean the process flow is common between TAS5825M and TAS5828M?

Regards,
Kazuto

over 3 years ago

+1 Shadow He over 3 years ago

TI__Mastermind 37960 points

Hi Kazuto

The TAS5828M haven't gone into mass production stage yet, it's own process flow document haven't been prepared. The block SRC, AGL, 15BQs, etc. are the same as the TAS5825M, so we can use 5825M's process flow document as the reference.

0 Kazuto Tatsumi over 3 years ago in reply to Shadow He

TI__Intellectual 2820 points

Thanks Shadow! understood.

0 Kazuto Tatsumi over 3 years ago in reply to Kazuto Tatsumi

TI__Intellectual 2820 points

Hi Shadow,

Each datasheet seems to have different features description as below, but all of them is identical?

TAS5825P

TAS5828M

Both of them has same description for process flows

Regards,
Kazuto

0 Shadow He over 3 years ago in reply to Kazuto Tatsumi

TI__Mastermind 37960 points

Hi Kazuto

For every function block, like AGL or DRC, their parameters in PPC3 are almost the same. Our customer can set these function block the same with 5825.

0 Kazuto Tatsumi over 3 years ago in reply to Shadow He

TI__Intellectual 2820 points

Hi Shadow,

so the feature description looks different but the actual parameter set on both TAS5825P and TAS5828M are the same, correct?

Regards,
Kazuto

0 Shadow He over 3 years ago in reply to Kazuto Tatsumi

TI__Mastermind 37960 points

Hi Kazuto

The actual parameter set in PPC3 are the same, in the same function blocks of this two devices. But of course this two device won't be exactly same, maybe the number of the BQs, or some register address are different, but this shouldn't affect our customer to use it. Use the 5825's process flow as the reference, and with some flexibility.