TLV320ADCX140SW-DRIVERS: supported sample rates

Hello Carson,

I've changed it to "SNDRV_PCM_RATE_8000_192000" and that gave me the ability to run "arecord" ( Linux command ) at different rates.

With the original settings (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000), I received an error while trying to run for example 8K or 96K ).

I'm trying to figure out whether the driver's header got a mistake or there is something wrong with my configuration?

Consider that the CPU is the master.

BR,

Moran.

Hello,

I will bring this up with the software team, and relay their feedback upon their response, within a day or so.

Best Regards,

Carson

Hello,

I am still waiting their reply, sorry for delay.

Original code only support these two sample rate(44.1 and 48kHz) in the code. If you want to support more, You can add more sample rates which adcx140 can support.

Hello,

Do you mean that the original code doesn't support any multiple or submultiple of each ( 44.1 | 48 ).

So, if I need 96K ( for example ) --> changing in header to this define : "SNDRV_PCM_RATE_8000_192000" is correct ???

BR,

Moran.

Thanks & Good year