• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 292 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

How to configure the USB-MODEVM of the TLV320AIC3254 EVM to transfer the audio data in DSP mode

GrantHatamosa
Expert 1930 points
Other Parts Discussed in Thread: TLV320AIC3254

Hi,


We are trying to compare the behavior of our customer system with TLV320AIC3254 with that of the EVM. To be able to do this we need to reconfigure the USB-MODEVM to transfer the Audio data in DSP mode instead of I2S mode.

Can you please advise us how this can be done? We know that we can reconfigure the TLV320AIC3254 register to indicate that it's receiving DSP data but the data being transmitted by the USB-MODEVM is still in I2S.

Regards,

Grant