PCM1754: Want to know about MUTE pin of PCM1754.

Koki Tsushima

Prodigy 715 points

Part Number: PCM1754

Hi Expert,

This is Koki Tsushima.

My customer wants to know about MUTE pin of PCM1754.

Could you answer following two questions?

1. Does 14pin (MUTE) have tolerant functions etc.? Customer think so because absolute maximum rating of Vcc is -0.3V to 6.5V.

Is this correct? And if so, could you tell me that detail? i.e. tolerant functions for up to 6.5V when Vcc=0V etc.

2. Does 14pin (MUTE) have internal pull-down resister? What value is it?

Best,

Koki Tsushima

over 2 years ago

0 Jeff McPherson over 2 years ago

TI__Mastermind 29250 points

Hi Tsushima-san,

I will need to check with out design team to get that kind of internal information. I will reach out and get back to you.

Best regards,

Jeff

0 Jeff McPherson over 2 years ago in reply to Jeff McPherson

TI__Mastermind 29250 points

Tsushima-san,

The mute pin is most likely not tolerant. Due to relocations of design teams and the age of the part, detailed information like the pull down resisitor is not readily accessible.

Thanks,

Jeff

0 Koki Tsushima over 2 years ago in reply to Jeff McPherson

TI__Prodigy 715 points

Hi Jeff-san,

Thank you a lot.

But it seems to be there are differences of ranges.

i.e. There are Vcc is within Absolute Maximum range, but out of Operating conditions as follows, like 6.5V for example,

It shouldn't bebroken device. Is this correct?

But if so, why are there no tolerance function?

I guess the device will be multifunction on Absolute Maximum range, but out of Operating conditions . Is it OK for you?

Is it possible to tell me when you can know value of pull-down resister?

Thank you

Koki Tsushima

0 Jeff McPherson over 2 years ago in reply to Koki Tsushima

TI__Mastermind 29250 points

Since the design team doesn't believe there is tolerant functions, the device probably can resist harm when Vcc < 6.5 but will suffer performance quality loss when Vcc > 5.5V. As long as Vcc < 6.5V the device will not be broken.

I'm not sure we have the resources to support the effort to get that info, but to speed up the process reach out to our design team contact

Best Regards,

Jeff

0 Koki Tsushima over 2 years ago in reply to Jeff McPherson

TI__Prodigy 715 points

Hi Jeff-san,

Thank you for your kind.

Sorry but please confirm me one more thing.

Does the device not be broken when Voltage was added at MUTEPIN when Vcc=0V?

I think this is true.

Could you help me?

Thank you!

+1 Jeff McPherson over 2 years ago in reply to Koki Tsushima

TI__Mastermind 29250 points

As long as you are not going over any documented maximum, the device should not be harmed.

Thanks,

Jeff

Audio

Audio forum

PCM1754: Want to know about MUTE pin of PCM1754.