• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 309 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLV320AIC3101: Input acceptable noise range for TLV320AIC3101

Gary Teng
Genius 5860 points
Part Number: TLV320AIC3101


Hi Sir,

 My customer want to know if there's spec. about acceptable noise range (mV) from input (MIC/LINE) to GND for their testing team. Do we have relative data? Thanks for your kindly help.

Best regards,

Gary Teng

  • 0
    TI__Mastermind 47865 points

    Hi Gary,

    I'm not sure what you mean by "acceptable noise range." Whatever noise you give the device will be translated on the other side. If your noise is below 92dB (17uV) the noise should vanish into the noise floor. Higher than that would begin to reflect in SNR degradation.

    Best regards,

    Jeff