• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 226 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS6424E-Q1: the factors that affect THD and SNR

Sherry Liang
Genius 10255 points
Part Number: TAS6424E-Q1


Dear team,

For TDM mode, if the customer changes the data length from 16bit to 24bit, will this affect the THD and SNR of load?

Thanks & Best Regards,

Sherry

  • 0
    TI__Guru 52180 points

    Hi Sherry

       Almost no difference if you test THD or SNR results. Using 24bit input will make the digital signal more precise, which may get a better results after the DSP process. But for most of the time, you shouldn't find any difference at the final output.