purepath audio- 40 recievers and 1 transmitter

JasonHaedt

Other Parts Discussed in Thread: CC1101

ti,

i want to have one transmitter with 40 recievers. is that possible with purepath? i will only be transmitting on a single channel.

-jason

0 Kjetil over 14 years ago

Hi Jason,

Not in its current version nor in the immediate future.

Regards,
Kjetil

0 JasonHaedt over 14 years ago in reply to Kjetil

Genius 3320 points

what is the maxiumum recievers. also any other solutions from ti to do this.

0 Kjetil over 14 years ago in reply to JasonHaedt

For the PurePath Wireless family it's currently 4.

As for other technologies, TI might have something to offer, but will need more information on the application and the audio quality required.

Kjetil

0 Ed Walker over 14 years ago in reply to Kjetil

The application would be public address systems, large buildings with emergency speakers for audio notification, wireless intercom.

Voice audio range is sufficient, not music quality audio.

Generally low quality audio that is broadcasted over large areas.

0 MikeBurns over 14 years ago in reply to Ed Walker

This is a perfect application for the CC1110/CC1101. See Application Note AN082 (http://focus.ti.com/general/docs/lit/getliterature.tsp?literatureNumber=swra295a&fileType=pdf). In One Way mode, audio sample rates of from 8 to 24 kHz are supported, and there is no limit on the number of receivers.

Demo kits are available.

0 johny radio over 11 years ago in reply to MikeBurns

Expert 1050 points

is there a product now available, similar to the CC1110/CC1101, but with higher audio quality?

need no limit on number of receivers.

prefer 900 Mhz, or 2.4 Ghz max.

thx!

Audio forum