• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 380 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS5631 PWM input - output Delay

Christopher Krug
Prodigy 10 points
Other Parts Discussed in Thread: TAS5631, TAS5261

Hello TI Community.

I have a question about the TAS5631 digital audio amplifiers:


Is there any delay between the lower level PWM input signal and the higher level PWM output signal ?

On the way from the PWM input to output is some logic in the functional block diagram but there are no details.

 

Thanks and Greetings from German

  • 0
    TI__Expert 4320 points

    Hello Mr. Krug

    Yes there is a delay - first the loop filter, then the comparator, then the deadtime control and gatedrive - all in all aprox 300-400nS.

    This is all due to the feedback loop - if you look at our open loop power stages like TAS5261 where there there is no feedback the delay is lower around 150-200nS

     

    Best regards

    Kim N Madsen