TAS5805MEVM: how to set two pa to different channels

Hi Huiyu,

    Glad to reply to your questions! The word length is selected via Register (P0-R51-D[1:0]). The offsets of data are selected via Register (P0-R51-D[7]) and Register (P0-R52-D[7:0]). You can take the attached file as a reference.  /cfs-file/__key/communityserver-discussions-components-files/6/8446.TAS58xxTDM16-Configurations.pdf

    Thanks very much!

Aylin Zhang

Hi Aylin，

Thank you for your response~I set the register(0x34) of pa to 0x00, and set another pa's register(0x34) to 0xC0. But only one pa can work normally, anther pa can't. While when I set the register(0x34) of the two pa to 0x00, both can work.

Hi Huiyu

We are sure that ch2 and ch3 TDM has audio data, right? Can we try on some other devices?

Hi Shadow

I am sure that ch2 and ch3 TDM has audio data, because they work when I set tthe register(0x34) of the two pa to 0xC0. I only have one TAS5805MEVM, so I can't try on some other devices.

hello dear TI Engineer：

This problem has been solved, thank you all for your support.

Hi Huiyu,

    No thanks! How been the problem solved?

Aylin 

I set register(0x35) to 0x33, then the problem was solved.

Hi Huiyu,

    Ok. Thanks!

Aylin