TAS5825PEVM: MCU

Hi Jeff

skip xmos is also ok.

customer can jump i2c and i2s wire to our evm board directly.

then using ppc3 to config the amplifier can also work.

thanks.

jesse

Hi Jesse,

So they just need jump i2c and i2s to their own TAS5825P board, right?

There anything need to notice?

Thanks!

Jeff

Hi Jesse,

And TAS5825P have similar with charger BQ product using independent MCU board(Ex. USBANY) to control TAS582P?

Thanks!

Jeff

Hi Jeff

Jeff YANG said:

There anything need to notice?

Just take care if the DVDD on customer's board is also 3.3V, not 1.8V.

Jeff YANG said:

And TAS5825P have similar with charger BQ product using independent MCU board(Ex. USBANY) to control TAS582P?

Sorry not fully understand your question, could you explain more?

Hi Shadow,

Please see below BQ25180 EVM, it have independent USB2ANY MCU board control BQ25180 EVM,

Customer wnats to know there have any independent MCU board for TAS5825P?

https://www.ti.com/lit/ug/sluuch5b/sluuch5b.pdf?ts=1673315236031&ref_url=https%253A%252F%252Fwww.google.com%252F

Thanks!

Jeff

Hi Jeff

we don't have an independent mcu board for amp evm board.

if customer want the USB2ANY device, below link should be able to get one.

https://www.ti.com/tool/USB2ANY

this device can also be used for connecting amp evm board.

thanks.

jesse