Hello !
Can I connect the exposed pad on the QFN package to 3.3V Vcc ? In my case, it would make layout much simpler.
Thanks !
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello !
Can I connect the exposed pad on the QFN package to 3.3V Vcc ? In my case, it would make layout much simpler.
Thanks !
Hi Madis,
The exposed pad has to be connected to GND, specifically AGND if you're separating analog from digital GND.
Best regards,
-Ivan Salazar
Applications Engineer