TAS5828M: TAS5828 PBTL inductor

Ning Li

Part Number: TAS5828M

Dears,

The custoimer designed TAS5828 PBTL mode and would like to know if it is possible to use only two output inductors.

Thanks

0 Shadow He over 2 years ago

Hi Ning

Yes, could use only two inductors. Just make sure the rated current of the inductor is sufficient for the max output power.

0 Ning Li over 2 years ago in reply to Shadow He

Hi Shadow,

I check the spec,find that in the hard ware mode with 4PCS inductor,in MONO mode with 2PCS inductor,so the two mode have any difference?

Thanks

0 Ning Li over 2 years ago in reply to Ning Li

Hi Shadow,

0 Jesse Ji over 2 years ago in reply to Ning Li

Hi Li

basically, they are the same. it has no relationship with i2c or hardware mode.

just need to consider the Isat of inductor been used when choose 4 inductors or 2 inductors.

thanks.

jesse

0 Ning Li over 2 years ago in reply to Jesse Ji

Hi Jesse,

Noted,I will feedback with customer,Thanks for your great support.

Thanks

Audio forum