TAS2563: About the data length of audio format

Ryu Yamashita

Part Number: TAS2563

Hi team,

Can this device handle 24-bit length data in left-justified or I2S format?
Also, I understand that MCLK does not need to be input, is this correct?

Sincerely.
Ryu

+1 Ivan Salazar over 2 years ago

Hi Ryu,

Yes, 24-bit data is supported for both LJF or I2S, you can refer to RX_WLEN and RX_SLEN bits in Page 0 Register 0x08: https://www.ti.com/lit/ds/symlink/tas2563.pdf#page=69&zoom=100,0,815

That is also correct; MCLK is not required. BCLK is used instead to generate the required internal clock tree.

Best regards,
-Ivan Salazar
Applications Engineer

0 Ryu Yamashita over 2 years ago in reply to Ivan Salazar

Genius 3765 points

Hi Ivan,

Thanks for the reply.
I understood.

Sincerely.
Ryu

Audio forum