Audio Codec supported for Jetson xavier NX

Wipop Panyatipsakul

Other Parts Discussed in Thread: TLV320AIC3107, TLV320AIC3100

Hi,

Now I’m finding audio codec which compatible to NVIDIA Jetson Xavier NX. I need to interface the codec using I2S (like Fig 11-1, NVIDIA Product design guide) and need it can immediately use or less modify after connect. The output is 3.5mm audio speaker jack.

Any parts, solutions recommend? Any codec drivers need? If need, are there already available drivers support?

over 2 years ago

+1 Jeff McPherson over 2 years ago

TI__Mastermind 48215 points

Hi Wipop,

Take a look at the TLV320AIC3107. That looks like a good fit for what you're asking for.

Best regards,
Jeff McPherson

0 Wipop Panyatipsakul over 2 years ago in reply to Jeff McPherson

Prodigy 60 points

Hi Jeff,

Thanks for your recommend, I'm reading it's features. Any drivers need or available?

Best regards,

Wipop

0 Jeff McPherson over 2 years ago in reply to Wipop Panyatipsakul

TI__Mastermind 48215 points

Hi Wipop,

Drivers are not required to configure the device. It uses I2C as the communication protocol. We do have linux drivers available if you are interfacing with a larger software system. They can be found on the product page: https://www.ti.com/product/TLV320AIC3107

Best regards,
Jeff McPherson

0 Wipop Panyatipsakul over 2 years ago in reply to Jeff McPherson

Prodigy 60 points

Hi Jeff,

I may change to TLV320AIC3100 which smaller, Is this Ok? (same function to 3107 but less output, enough for me.)

0 Jeff McPherson over 2 years ago in reply to Wipop Panyatipsakul

TI__Mastermind 48215 points

Hi Wipop,

Sure thing. If the AIC3100 is better for you, I don't see a problem.

Audio

Audio forum

Audio Codec supported for Jetson xavier NX