TPA6211A1: TPA6211A1 TI Spiice

Francesco Gerardi

Part Number: TPA6211A1

i downloaded the TPA6211A1 spice library from the TI official site, i added it in the Pspice library, but when i launch the simulation i have the following error (see attached image).

I saw that inside the zip file that i downloaded ther'isnt the file libsig.

Is possibile is this the problem?

Thanks for your attention

Regards

Francesco

over 2 years ago

0 Ivan Salazar over 2 years ago

TI__Guru** 111685 points

Hi Francesco,

I'll double check the model import process using PSpice for TI, I'll get some feedback by the end of the week.

Best regards,
-Ivan Salazar
Applications Engineer

0 Francesco Gerardi over 2 years ago in reply to Ivan Salazar

Prodigy 30 points

Hi Ivan

do you have some news about this topic?

0 Ivan Salazar over 2 years ago in reply to Francesco Gerardi

TI__Guru** 111685 points

Hi Francesco,

Apologies for the delayed response. I was not able to test this so far, I'll make time to check this within the next couple of days.

Best regards,
-Ivan Salazar
Applications Engineer

0 Ivan Salazar over 2 years ago in reply to Ivan Salazar

TI__Guru** 111685 points

Hi Francesco,

I'll get to this by tomorrow and give some feedback before the end of the day.

Best regards,
-Ivan Salazar
Applications Engineer

0 Ivan Salazar over 2 years ago in reply to Ivan Salazar

TI__Guru** 111685 points

Hi Francesco,

I had a previous working sim project for TPA6211A1, you can give it a try and make the changes as you need.

Best regards,
-Ivan Salazar
Applications Engineer

TPA6211A1_GainTest.zip

Audio

Audio forum

TPA6211A1: TPA6211A1 TI Spiice