TPA2011D1: If the cable to the speaker is long

Ryu Yamashita

Part Number: TPA2011D1

Hi team,

When using long cables (up to 100m) with filter-less amplifiers like the TPA2011D1, is it advisable to have a separate filter?
Also, please tell me how to calculate the filter in such a case.
Also, are there any class D amplifiers suitable for connecting long cables?

Best,
Ryu.

8 months ago

0 Ivan Salazar 8 months ago

TI__Guru* 99635 points

Hi Ryu,

For Class-D amplifiers, it is recommended to use a filter at the output of the if the amplifier is far from it.
There are a couple documents you can refer to, depending on if using ferrite bead or LC filter:

https://www.ti.com/lit/an/sloa145/sloa145.pdf
https://www.ti.com/lit/an/slaa701a/slaa701a.pdf

Linear amplifiers like Class-AB would not require filter with tradeoff on efficiency at higher power levels vs Class-D.

Best regards,
-Ivan Salazar
Applications Engineer

Audio

Audio forum

TPA2011D1: If the cable to the speaker is long