• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 810 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PCM5122: How to configure I2S master or slave?

Kei Kuwahara
Expert 8760 points

Part Number: PCM5122
Other Parts Discussed in Thread: TAD5242

Hello team,

How can I configure I2S master or slave for this device? Can I configure with hardware pin?

For example, TAD5242 is clear that I can configure I2S by hardware pin.

Best Regards,
Kei Kuwahara

  • +1
    TI__Mastermind 36061 points

    Hello Kei,

    This is mentioned in datasheet pin assignment's table. Pin 14 (MAST) in hardware mode makes the device master or slave: Connect this pin  to High and device will be in Master mode and  BCK/LRCK will be outputs, or connect MAST to LOW and device will be in Slave mode and you need to provide the clks.

    Regards,

    Arash