Hello.
I want to make a product using the Buletooth Chip and TAS5806MD.
I2C was connected to the above 2 product EVKIT to check the sound motion.
We also have a PUREPATH board, so we know that DRC control is possible through PPC3 separately.
Like PPC3 DRC, I would like to use DRC by connecting Buletooth Chip and TAS5806MD.
However, if you look at DATASHEET, there are no registers for DRC.
I don't know what value to enter to use DRC.
I know that header files can be extracted from PPC3.
I don't know how to use header files alone.
Is it impossible to use DRC function unless it's PPC3?
I hope you can help me.
240119_DRC+RESISTOR_TUNING.xlsxAttached is the header file.