This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS6424L-Q1: SNR test results

Part Number: TAS6424L-Q1

Hi team,

1. Do you have test results of SNR on TAS6424L-Q1 EVM?

2. Is it possible to calculate SNR by using Vout/Vnoise, Vnoise from below curve?

  • Hi,

    The noise tests are made on our test hardware.  The noise tests were not made on the EVM, but the values should be very close to the same.

    SNR = 20log(Vout/Vnoise)  Take the Vnoise from the graph..

    Regards,
    Gregg Scott