• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 224 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DIT4096: Input output delay time

Shuji Ishiwata
Mastermind 6615 points
Part Number: DIT4096
Other Parts Discussed in Thread: DIR9001

Hi All,


I have a question regarding DIT4096.
Please tell me the delay time from input to output.


Best Regards,
Ishiwata

  • 0
    TI__Mastermind 24370 points

    Hello Ishiwata,

    There is no specific data for this part,  the only piece of information that we have is from a pervious  post that it suggests:


    The data sheet states that the DIR9001 delay from SPDIF input to LRCKO toggle is 3/Fs, meaning at 48 kHz sampling, will be 62.5 us, and less at 96 kHz. I do not have a measurement for the DIT4096, but I do not think it would be too far off what the DIR's delay is. 

    Regards,

    Arash

  • 0 in reply to Arash Loloee
    Mastermind 6615 points

    Hi Arash、

    Thank you for your answer.

    I have an additional question.
    I plan to use multiple DIT4096.
    If the input timing of each device is the same, will the output timing be different?
    How many Fs will change? Or does it shift?
    I don't think the output timing of each device is significantly different.

    Best Regards,
    Ishiwata

  • 0 in reply to Shuji Ishiwata
    TI__Mastermind 24370 points

    Hi Ishiwata, You are most welcome.

    Delay is sampling frequency dependent,  so they all would  propagate the same with  3/Fs delay( as we established from above) .

    Regards,

    Arash