Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 195 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLV320AIC1110: Schematic Review

Ryu Yamashita
Expert 2640 points
Part Number: TLV320AIC1110

Hi team,

While outputting the received audio at PCMI, it is folded back and converted again for transmission at PCMO.
If audio input is received, it is added to the folded signal and converted to PCM.
We would like to realize a configuration like this.
I would like to have a schematic review, but I don't want to make it public, so can we communicate via private message?

Sincerely,
Ryu.

  • 0
    TI__Mastermind 29745 points

    Hi,

    There's a PCM loopback mode as shown in the register below. This mode takes the digital output (PCMOUT) of analog input (MICIN) and route it to PCMIN.

    If there's a PCMIN, they will not add when loopback is enabled.

    I've sent you a private message and you can send the schematic there.

    Regards.