ADC3120Q1EVM-PDK: Using ADC3120Q1EVM-PDK and AC-MB DC058 Rev A, with PurePath Console v3.2.0

Philip James

I wanted to know if there's a command(s) to allow the ADC output to be dumped to the "log" so I can save it? Thank you, Philip

2 months ago

0 Jeff McPherson 2 months ago

TI__Mastermind 26125 points

Hi Philip,

Unfortunately PPC3 has no way of monitoring or dumping the ADC output. What is possible is to use a free software like Audacity or Goldwave and record audio over USB from the ADC. Then you'll be able to save/monitor the data.

Best regards,
Jeff McPherson

0 Philip James 2 months ago in reply to Jeff McPherson

Prodigy 40 points

Jeff, Okay. Thank you for the quick response. To be clear, I'm just wanting the hex or decimal value....not an audio/auditory recording. I was thinking the I2C Log/IO could do this. Philip

0 Jeff McPherson 2 months ago in reply to Philip James

TI__Mastermind 26125 points

Hi Philip,

Thanks for the clarification, I did misunderstand. However the answer is the same. I wouldn't be surprised though if Audacity or Goldwave are capable of returning data in a hex or decimal format.

Best regards,
Jeff McPherson

0 Philip James 2 months ago in reply to Jeff McPherson

Prodigy 40 points

Jeff, Okay...Thank you.

Audio

Audio forum

ADC3120Q1EVM-PDK: Using ADC3120Q1EVM-PDK and AC-MB DC058 Rev A, with PurePath Console v3.2.0