This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
If we want to use external boost on TAS2x63EVM, how should we do?
Remove L8 and external power 15V directly connect J8? And the power sequence is VBAT-> VBST_PVDD?
Thank you.
Hi Henry,
That is correct, you can refer to this document: https://www.ti.com/lit/an/slaa972/slaa972.pdf
Please note that VBAT must be higher than 3.5V if using PVDD = 15V.
Best regards,
-Ivan Salazar
Applications Engineer