PUREPATHCONSOLE: Why was the PPC authorization for TAS2564 that I applied for rejected

Hi Gan,

PPC3 is the software that runs different device apps. What it means is you download and install the PPC3 first which is not any device specific, and then you add different device apps on it. If you already have the PPC3 software installed, you will need to request for the TAS2564 device app to run on the PPC3. Here is the link to request for the TAS2564 app: https://www.ti.com/drr/opn/TAS2564-SW

Once you submit the request, please let me know and we will approve you on our side right away. 

i have submit the request for tas2564 used your link,please approve my request as soon as possible ,thanks

Sure, we are looking into this. Can you also tell us about what application this device is intended to be used for? What the end application is, where you are in the design phase, etc.?

My application is smart power amplifier. End application is mobile phones and Bluetooth speakers. we have already in design phase,previously planned to use tas2562,but it power is not enough. Subsequent demand requires 100K pics per month

Thanks for the additional information, Gan. It looks like your PPC3 software is also not approved yet. Can you please submit the request for the PPC3 here: https://www.ti.com/drr/opn/PUREPATHCONSOLE

Once received we will approve you for both PPC3 and the TAS2564 device app. You should be all set then.

when i click your link it says: You have been denied access to this resource.

I have request once a week ago, but I don't know why it was rejected.

when i want to request it again,it still says:You have been denied access to this resource.

I have successfully applied for 2562 before，but 2564 denied

From our side we are not seeing your request for some reason. We are looking into it and trying to manually approve you. It may take a day or two. I will get back to you as soon as it is resolved.

Hi Gan, your email is now approved in our system. Could you please try again to download PPC3?

hi，i have already receive your approved email,but after download and install ppc3,but it availiable apps didn't have TAS2564,only have  2562 and 2557 which i request last year 

Now that you have PPC3 installed, you will need to add the TAS2564 app.

Here is the link to request for the TAS2564 app: https://www.ti.com/drr/opn/TAS2564-SW

what did i should download in your link,it seems didn't have anythings i need download,they are all ducument

You should download the very last one tar.gz file. 

Here is a step by step guide on How to Install PurePath︎ Console 3 Device Apps Manually

thanks for resolve my problem