Tool/software:
Hi team,
My customer designed the schematic referring the Typical Circuit in D/S.
However, XTI voltage reach -0.57V and it is over the maximum rating (-0.3V).
Is this no problem?
Best regards,
Goto
Tool/software:
Hi team,
My customer designed the schematic referring the Typical Circuit in D/S.
However, XTI voltage reach -0.57V and it is over the maximum rating (-0.3V).
Is this no problem?
Best regards,
Goto
Hi Goto-san,
This is okay. The limit is targeted toward the use case where XTI is used as external clock input, but when using XTI with the crystal, this limit can be relaxed some.
Best regards,
Jeff McPherson