Part Number: TAS6584-Q1
Tool/software:
Hello experts,
Regarding TAS6584-Q1, are these status register automatically cleared once fault conditions are removed?
Or, do all the status registers need writing of CLEAR FAULT bit to 1 to clear the faults?
Thanks,
Kento
Hello Gregg,
Thank you.
To clear the FAULT registers, you use the CLEAR FAULT bit.
1. As for the fault registers, they are not automatically cleard even when fault state cleared, is it correct?
2. What are the fault registers in the status registers? Or All of the status registers are not fault registers?
For example
2-1. Are WARNING signal and FAULT signal fault registers? Are DVDD UV, PVDD OV... fault registers?
2-2. Are the DC LDG RPRT CH12 Registers fault registers?
Thanks,
Kento
