• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 30 subscribers
  • Views 145 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS5729MD: hot to use equalizer

Riccardo Sandrini
Prodigy 10 points
Part Number: TAS5729MD


Tool/software:

Hi, we are currently using RAS5729MD in our intercomm systems. To improve performances I would like to use the equalizer present in TAS5729MD. Where can I find instructions about using it? Datasheet doesn't give any detail...

Thanks in advance

  • +1
    TI__Genius 9195 points

    Hi Riccardo,

    The registers and format of the biquads can be found in the datasheet. Table 4 has the register map, section 3.23 shows the data format, and some biquad controls are shown in table 24. The GUI for the EVM can be used to generate the values and get an idea of the frequency response of different filters.

    Regards,

    Ramsey

  • 0 in reply to Ramsey Foote
    Prodigy 10 points

    Hi Ramsey, thank you for your answer. I understand that GUI is the only way to determine values for register. I'll follow this path.

    Best regards

    Riccardo