TAS5760L: Regarding the conversion of dB to dBV

takeru ishibashi

Part Number: TAS5760L

Tool/software:

I would like to know the dB-expressed gain of the TAS5760L converted into dBV.
・Digital Boost
・Volume Control
・Digital Clipper

Regards,

Ishibashi

5 months ago

0 Sydney Northcutt 5 months ago

TI__Mastermind 20040 points

Hi Ishibashi-san,

This will depend on your specific settings. Overall you can add together your dB gains of each feature (analog gain, digital boost, volume control, etc.) to know the full gain. Also note the digital clipper is not adjusting the gain. This is just setting the clip point of the amplifier.

Regards,
Sydney Northcutt

0 takeru ishibashi 5 months ago in reply to Sydney Northcutt

Prodigy 90 points

Hi Sydney Northcutt-san

Thank you for your answer.

I would also like to know about Analog Gain.
For example, does 19.2dBV mean that when a 1V sine wave signal is input, an output of about 9.12V is obtained?

Regards,

Ishibashi

0 Sydney Northcutt 5 months ago in reply to takeru ishibashi

TI__Mastermind 20040 points

Hi Ishibashi-san,

This is a digital input amplifier, so if the input is a full scale signal (0 dBFS) and you do not have any other settings altering the gain, then yes.

Regards,
Sydney Northcutt

0 takeru ishibashi 5 months ago in reply to Sydney Northcutt

Prodigy 90 points

Hi, Sydney-san

I understand.
Thank you for your reply.

Regards, Ishibashi

Audio

Audio forum

TAS5760L: Regarding the conversion of dB to dBV