Part Number: TAS5825M
Other Parts Discussed in Thread: , TAS2558, TAS2781
Hi Team,
Posting on behalf of our customer.
I will share this E2E post to our customer so he can reply when needed.
We have a custom board with 3 TAS5825M. Two of them are configured as stereo left right (BTL) and one of them as mono (PBTL). The two stereo amps play left and right audio correctly.
However, the mono amp only plays the audio from the left channel although the input mixer is set to route left and right channels with -6 dB to left in PPC3 (left-left -6 dB, right -left -6 dB). When we play an alternating stereo signal of 5 seconds on left then 5 seconds on right, the PBTL amp only plays the left channel.
What could be the issue?
I attached the ppc3 file and the cfg file that I am using with the bintool for the tas device driver.
Regards,
Danilo


