PCM9211EVM-U: PCM9211EVM-U: Cannot connect PCM9211 EVM

Mochi

Genius 4325 points

Part Number: PCM9211EVM-U

Hello,

It is related question for below thread.

Our customer bought the EVM and can not run GUI on Win11 PC.

Do you have release plan of Win11 version SW?

Regards,

Mochizuki

https://e2e.ti.com/support/audio-group/audio/f/audio-forum/1280568/pcm9211evm-u-cannot-connect-pcm9211-evm?ReplyFilter=Answers&ReplySortBy=Answers&ReplySortOrder=Descending

6 months ago

0 Garret Godfrey 6 months ago

TI__Mastermind 22396 points

Hi Mochizuki-san,

I am not aware of any plans to release the GUI for Win11. This EVM can be programmed using the I2C Master on PPC3.

Best,

Garret

0 Mochi 6 months ago in reply to Garret Godfrey

Genius 4325 points

Hi Garret,

We are referring PCM9211EVM application note of SBAA179, however there is not description of PPC3.

What is your recommended PPC3 device version should we use such as some of CODEC or D-amp EVM?

But I am little bit nervous that PPC3 will correctly recognize TAS1020 on PCM9211EVM.

Regards,

Mochizuki

0 Jeff McPherson 6 months ago in reply to Mochi

TI__Guru 51190 points

Hi Mochi-san,

PPC3 comes default with an I2C master that can be used to communicate to our EVMs. This way it is not device specific and is a very simple window to write generic I2C commands. Do not worry, it will also work with TAS1020.

You can request access for it here: https://www.ti.com/tool/PUREPATHCONSOLE

Once approved a user's guide on PPC3 will be available to you through ti.com

Best regards,
Jeff McPherson

Audio

Audio forum

PCM9211EVM-U: PCM9211EVM-U: Cannot connect PCM9211 EVM