Audio

Audio forum

State TI Thinks Resolved
Replies 3 replies
Answers 1 answer
Subscribers 31 subscribers
Views 62 views
Users 0 members are here

Support feedback

Options

Options

Related

TAC5142: TAC5142 GPO (Pin 11) behaviour.

Danny Rachmany

Prodigy 10 points

Part Number: TAC5142

During a clk error condition GPO output drive High or Low

0 Arash Loloee 8 days ago

TI__Mastermind 35901 points

Hi, the interrupt outputs are typically asserted = low

Regards,

Arash

0 Danny Rachmany 7 days ago in reply to Arash Loloee

Prodigy 10 points

Can you please confirm specifically for the TAC5142 that the GPO pin is an active-low open-drain output and therefore requires an external pull-up resistor?

0 Arash Loloee 7 days ago in reply to Danny Rachmany

TI__Mastermind 35901 points

It is active low, no need for external pullup.