• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 380 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

compatible amplifier for a particle velocity microphone

priyanka de silva
Prodigy 10 points
Other Parts Discussed in Thread: LMV1091

Could you please let me know weather you have any compatible amplifier to this microphone (http://www.digikey.com/product-detail/en/NR-23160-000/423-1010-ND/458521)

  • 0
    TI__Expert 3840 points

    Hi Priyanka,

    TI has a large number of standard low-noise op amps as well as JFET op amps that can be used as preamplifiers depending upon your design requirements. We also have an analog noise cancellation IC that can just be used as a mic preamp if desired; LMV1091. I'd like to suggest that you take a look at the parametric tables; this way it will be quickest for you to rule out those parameters that don't fit your design.

    Best Regards,

    JD