PCM1794 mono

Igor Popkov

Other Parts Discussed in Thread: PCM1794, SRC4192

Can not turn on 2 chips in mono mode.
Know how to configure, but it turns out that one chip is in another silence.
What a master clock must come to PCM1794, from the generator or from the output src4192?
src4192 to what the regime in TDM mode, or I2s?

over 12 years ago

0 Patrick Galvin over 12 years ago

TI__Genius 16270 points

Igor,

Can you attach a schematic? I'm unsure of what the exact setup is. What mode are you trying to use?

0 Igor Popkov over 12 years ago in reply to Patrick Galvin

Prodigy 50 points

Understood.
Turned in mixed src4192 pins 18 and 19, which are connected to another. In the end, I found the format I2S instead TDM, and the sound will appear in the chip.

Understood.
Turned in mixed src4192 pins 18 and 19 that connect the end, I found naoborot.V I2S format instead TDM, and the sound will appear in the chip.

Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

Audio

Audio forum

PCM1794 mono