AIC310x.exe doesn't run

nguyen viet quoc

Prodigy 40 points

Other Parts Discussed in Thread: TLV320AIC3106EVM-K

I am installing AIC 3106 Kit. But i have problem please help me.

In image , you can see, LED D5 have red light, and D6 does not light up.

But in User Guide say that LEDs D3-6 should light to indicate the power is being supplied from the USB.

....

it doesn't give problem when I install driver but when i run AIC310x.exe, after choose control I2C is control interface mode, program is off automatically without error notification.

what is my problem, here??

please help me!!!!!!

Thank you very much

over 13 years ago

0 Converter Apps over 13 years ago

TI__Mastermind 28585 points

Please verify that you have downloaded the latest version of the software from here:

http://www.ti.com/tool/tlv320aic3106evm-k

Which operating system are you using?

0 nguyen viet quoc over 13 years ago in reply to Converter Apps

Prodigy 40 points

I tried in Windows XP SP2 Professional but it doesn't work.

i also download the last version as you tell , but the same happened.

Are there another way ??

0 nguyen viet quoc over 13 years ago in reply to nguyen viet quoc

Prodigy 40 points

exactly, i try in WinXp over VMware station.

are there problem ??

Please help me

0 Converter Apps over 13 years ago in reply to nguyen viet quoc

TI__Mastermind 28585 points

There is a troubleshooting guide here:

http://www.ti.com/lit/an/slaa388a/slaa388a.pdf

I have not seen a case where this software has run successfully on a virtual machine, but I am not very familiar with VMware, so you are probably on your own with that setup. I would try a PC running XP or Win7 for best results.

0 nguyen viet quoc over 13 years ago in reply to Converter Apps

Prodigy 40 points

thank you so much ^^

i will try

Audio

Audio forum

AIC310x.exe doesn't run