PCM9211 / GND layout

S.Satoshi

Other Parts Discussed in Thread: PCM9211EVM-U

Hi,

I would like our customer to refer the PCB layout of PCM9211EVM to design GND layout. Do you have PCB layout of PCM9211EVM or some reference information of PCB layout for DIX?

Best Regards,

Sonoki / Japan Disty

over 13 years ago

0 Don Dapkus over 13 years ago

TI__Guru**** 189401 points

Hi, Sonoki,

I will post the gerber files for you tomorrow.

-d2

0 S.Satoshi over 13 years ago in reply to Don Dapkus

Guru 21685 points

Hi, Don-san

Thank you for your quick response. It will be appreciated if you convert the gerber files to pdf format and attached it in addition to gerber files.

Best Regards,

Sonoki

0 Don Dapkus over 13 years ago in reply to S.Satoshi

TI__Guru**** 189401 points

Hi, Sonoki,

Here are the Gerber files. I am getting these posted to the PCM9211EVM-U Product Folder as well.

Unfortunately, I didn't make the .pdf files for you. I hope you can do what is needed.

-d2

0044.PCM9211EVM-U Gerber.zip

0 Don Dapkus over 13 years ago in reply to Don Dapkus

TI__Guru**** 189401 points

Hi, Sonoki,

I have also loaded this .zip file into our queue to be uploaded to www.ti.com tonight, so you can refer your customer to the EVM Product Folder if you want. I imagine it will get updated sometime after midnight Dallas time.

-d2

0 S.Satoshi over 13 years ago in reply to Don Dapkus

Guru 21685 points

Hi Don-san,

I could find gerber file in zip file you attached. Thanks!!

Sonoki

Audio

Audio forum

PCM9211 / GND layout