Hi,
We have several questions regarding the DC error detect conditions of TAS5760M,
would like to know how to detect in front of the external LC filter.
Q1. Specification of DC Error
There is a description of the DC detect threshold on page 35 table2 of data sheet.
Could you please express it in a figure?
Q2. Duty Cycle of DC Error
There is a description of the DC detect condition on pages 34 of data sheet as follow.
A DCE event occurs when the output differential duty-cycle of either channel exceeds 60% for more than 420msec at the same polarity.
Could you please express this meaning in a figure?
Best Regards,
Kato
