• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 429 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS5711 SE POP issue

Eddy Lee
Intellectual 840 points
Other Parts Discussed in Thread: TAS5711

HI,

This is BT speaker and I have a question.

TAS5711,2.1ch(Ch-A,B:SE, Ch-C&D:BTL) and only SE output is POP noise, but BTL is not issue.

Test condition is No input audio & power on/off control, and then POP issue.

I try to testing 0x05,0x1A,0x1B,, but is not solve.

I find similar issue is 5711EVM GUI, shutdown ON/OFF control.

Please your comment.

 

Best Regards,

Eddy (eddy.lee@avnet.com)