TAS5760M I2S Data Format and Internal Data Length

Sadanori Kato

Other Parts Discussed in Thread: TAS5760M, TAS5731

Hi,

We would like to know the I2S data format and internal data length of TAS5760M.
For the I2S data format, does this device support the 3.23 format(the fixed point) as TAS5731?
In addition, could you please tell us internal data length?
We guess that it is 32bits, an overflow bit and an underflow bit are 4bits each.
Is our understanding correct?

Best Regards,
Kato

over 12 years ago

0 Don Dapkus over 12 years ago

TI__Guru**** 189401 points

Hi, Kato-san,

Sorry, we are a little bit busy right now. I have asked my colleague to get back with you later this week.

-d2

0 Sadanori Kato over 12 years ago in reply to Don Dapkus

Guru 36540 points

Hi Don-san,

We are looking forward to your reply for this issue.

Best Regards,
Kato

0 Sadanori Kato over 12 years ago in reply to Sadanori Kato

Guru 36540 points

Hi Don-san,

We will inform our customer as below.
Is our understanding correct?

Since the digital audio processor is not embedded in this device,
this device processes internally depending on the audio input data length.
Therefore, it does not have an overflow bit and an underflow bit.

Best Regards,
Kato

0 Damian Lewis over 12 years ago in reply to Sadanori Kato

TI__Mastermind 35185 points

Kato-san,

Per our discussion that is correct!

0 Sadanori Kato over 12 years ago in reply to Damian Lewis

Guru 36540 points

Hi Damian-san,

Thank you for confirming.
I understood.

Best Regards,
Kato

Audio

Audio forum

TAS5760M I2S Data Format and Internal Data Length