TAS5760M Power On/Off Sequence

Sadanori Kato

Other Parts Discussed in Thread: TAS5760M, TAS5731

Hi,

We would like to know the recommended power on/off sequence and the procedure of the register access for TAS5760M.
Could you please describe the TAS5760M sequence(power on/off sequence, timing constraint, normal operation, power-down, etc.) like TAS5731(on page 30 to 31of the data sheet of TAS5731)?
In addition, since we found the procedure of the register access on page 53 of data sheet, could you please tell us about it in detail(access timing constraint)?

Best Regards,
Kato

over 11 years ago

0 Don Dapkus over 11 years ago

TI__Guru**** 189401 points

Hi, Kato-San,

my colleague will get back to you on this shortly.

0 Damian Lewis over 11 years ago in reply to Don Dapkus

TI__Mastermind 34775 points

Kato-san,

As our discussion there's sequence timing requirements for TAS5760 as previous TAS57xx devices. We do recommnend Startup and Shutdown Procedures on page 53 of TAS5760M d/s be followed as closely as possible and the customer fine tune the sequence timing to there taste or audio liking.

0 Sadanori Kato over 11 years ago in reply to Damian Lewis

Guru 36540 points

Hi Damian-san,

Thank you for your reply.
Although I can understand your procedure, could you please show the conditions regarding the timing constraint?
Our customer expects a specific example.

Best Regards,
Kato

Audio

Audio forum

TAS5760M Power On/Off Sequence