Settings outputs to Class 'D' using Pure Path

Howard Ive

Other Parts Discussed in Thread: TLV320AIC3254, TLV320AIC3254EVM-K

I am using the TLV320AIC3254 with the TLV320AIC3254EVM-K Demo Board

Using Pure Path how does one place the output amplifiers into Class 'D' (digital Mode) mode. I cannot find a output component that appears to do this.

I can do this by overlaying the register settings using a second script, but its a bit awkward.

Any help would be appreciated.

over 11 years ago

0 Don Dapkus over 11 years ago

TI__Guru**** 189401 points

Hi, Howard,

PPS only supports programming of the miniDSP.

For program register-based functions, you need to use the Control Software. You can find it here.

-d2

0 Howard Ive over 11 years ago in reply to Don Dapkus

Prodigy 100 points

Don,

Thank you for confirming, I Thought that was probably the case.

Audio

Audio forum

Settings outputs to Class 'D' using Pure Path